PCI2000ETH

overview applicomR , based on our open industrial communication concept , is designed for applications such as SCADA, MES, RDBM, spreadsheets, specific developments, etc., which require communication with devices connected on fieldbuses or industrial networks. The applicomR package includes software and smart board(s) specific for each type of fieldbus or industrial network. Thanks to its smart technology, all applicomR boards are able to execute the management and the treatment (polling, frame management, etc.) of the embedded protocols, resulting in remarkable application performance. Particularly, the applicomR PCI2000ETH board is equipped  with 1 Ethernet port and 1 optional Serial port (via extender).

platforms Compatible Platforms Windows 2000 / XP Windows NT 4.0 - Intel Windows 95, 98

protocol Compatible Ethernet Protocols Devices Ethway Groupe Schneider Industrial Ethernet ISO SIEMENS Simatic S5, S7 and TI-505 (READ/WRITE S5, S7 protocol)

Ethernet TCP/IP Protocols Devices Industrial Ethernet ISO & TCP/IP SIEMENS Simatic S5, S7 and TI-505 (READ/WRITE S5, S7 protocol, CAMP) Cegelec TCP/IP Cegelec Alspa C80 series (SRTP messaging) GE Fanuc TCP/IP GE Fanuc Series 90 (SRTP messaging) Mitsubishi TCP/IP MITSUBISHI Series A (MELSEC-A messaging) Modbus TCP/IP Schneider Electric (Modbus messaging) Schneider TCP/IP Schneider Electric (UNITE messaging)

Serial Protocols Devices 3964/3964R (free messaging or RK512) SIEMENS Simatic S5 AS511 SIEMENS Simatic S5 (programming port) Batibus Merlin Gerin (building automation) Data Link Elsag Bailey DF1, DH, DH+, DH-485 * Rockwell Automation (programming port) Modbus (master & slave) All Modbus & Jbus devices PPI+, PPI SIEMENS Simatic S7-200 (programming port) Saïa Bus Sa?/FONT>a SNP-X GE-Fanuc/Cegelec SucomA Kl?/FONT>ckner-Moeller Sysmac Way Omron TI-Dir SIEMENS Simatic TI-505 (programming port) Uni-Telway (master & slave) Groupe Schneider Kit4000TD Development toolkit for serial protocols

* DF1: for DH and DH+ via 1770-KF2.  For DH-485 via 1770-KF3 (1770-KF2 and 1770-KF3 not included)

technical data Technical Data   Unit PCI PC board (short length, single width) Processor Intel 80486DX4 Memory 4 Mbytes dynamic RAM Supported Interrupts Hardware Plug&Play DPRAM Address Hardware Plug&Play (2 Kbytes used per board) Discrete Input * Opto-coupled discrete input Voltage -> DC +10 to +30 or AC 24 V (50 to 60 Hz) Discrete Output * "WatchDog" output contact free from potential (floating) (24V DC, 0.25 A) Technology SMC technology; Complies with EMC for both Industrial and office use Dimensions (L x W) 175mm x 107mm (6.89" x 4.21") Consumption 6 W (max. 1.2A) Operating Temperature 0?C (32?F) up to +65?C (149?F) Storage Temperature -40?C (-92?F) up to +80?C (176?F)

Ethernet Port Port Type 1 Ethernet port - IEEE 802.3 Connector Type 15-pin AUI female connector (for BNC or optical transceiver), 10baseT (RJ45) or Siemens ITP Transmission LEDs 1 Transmit LED / 1 Receive LED Speed 10/100 Mbps

Serial Port *   Port Type 1 asynchronous serial port Connector Type 9-pin Sub-D male Transmission LEDs 1 Transmit LED / 1 Receive LED Electrical Interface On additional board: RS232C (2 or 6 signals) interface RS232C (2 or 6 signals) interface with galvanic insulation (500 Volts) RS485/RS422 interface RS485/RS422 interface with galvanic insulation (500 Volts) 20mA current loop interface Batibus interface Baud Rate from 50 to 38400 bps Supported Format 7 or 8 data bits 1 or 2 stop bits odd, even or no parity

* The discrete I/Os and serial port are mounted on a special bracket (ref: IOSPKIT), and require an additional rear panel slot.

utilities Utilities Board configuration utility (devices, protocols, communication parameters) Cyclic function configuration utility Diagnostics and test programs

	Exemple 2 : Ethernet ISO and TCP/IP diagnostic tool

add-on Brackets Discrete I/O´s and serial port bracket

Electrical Interfaces RS232C RS232C with galvanic insulation RS422/RS485 RS422/RS485 with galvanic insulation 20mA current loop Profibus module Profibus module with galvanic insulation Batibus module

ordering applicom® on PCI2000ETH board Reference under Windows NT Intel, Windows 2000 / XP PCI2000ETH/NT under Windows 95/98 PCI2000ETH/W95

Bracket Reference Discrete I/O´s and serial port bracket IOSPKIT

Electrical interfaces Reference RS232C 5RS232 RS232C with galvanic insulation (500 volts) 6RS232 RS422/RS485 5RS485 RS422/RS485 with galvanic insulation (500 Volts) 6RS485 20mA current loop 5BC20 Profibus module 5PFB485 Profibus module with galvanic insulation 6PFB485 Batibus module 5BCBAT

Ethernet Protocols Devices Reference Ethway Groupe Schneider PC/TE Industrial Ethernet TCP/IP SIEMENS Simatic S5, S7, TI-505 series (READ/WRITE S5, S7 protocol, CAMP) PC/SI-TCP Industrial Ethernet ISO SIEMENS Simatic S5 et S7 (READ/WRITE S5, S7 protocol) PC/SI Cegelec TCP/IP Cegelec Alspa C80 series (SRTP messaging) PC/GE-TCP GE Fanuc TCP/IP GE Fanuc Series 90 (SRTP messaging) PC/GE-TCP Mitsubishi TCP/IP MITSUBISHI Series A (MELSEC-A messaging) PC/MI-TCP Modbus TCP/IP Schneider Electric (Modbus messaging) PC/MB-TCP Schneider TCP/IP Schneider Electric (UNITE messaging) PC/TE-TCP

Serial Protocols Devices Reference 3964/3964R SIEMENS Simatic S5 PC/39 AS511 SIEMENS Simatic S5 (programming port) PC/AS Batibus Merlin Gerin (building automation) PC/BAT Data Link Elsag Bailey PC/DA DF1, DH, DH+, DH-485* Rockwell Automation (programming port) PC/DF Modbus All Jbus or Modbus devices PC/MB PPI+, PPI SIEMENS Simatic S7-200 (programming port) PC/PPI Sa?/FONT> a Bus Sa?/FONT>a PC/SB SNP-X GE-Fanuc/Cegelec PC/SNP SucomA Kl?/FONT>ckner-Moeller PC/SU Sysmac Way Omron PC/SW TI-Dir SIEMENS Simatic TI-505 (programming port) PC/TI Uni-Telway Groupe Schneider PC/TE Kit4000TD Development toolkit for serial protocols KIT4000TD

(*) DF1: for DH and DH+ via 1770-KF2.  For DH-485 via 1770-KF3 (1770-KF2 and 1770-KF3 not included)