PC2000ETH

overview applicom R, based on our open industrial communication concept, is designed for applications such as SCADA, MES, RDBM, spreadsheets, specific developments, etc., which require communication with devices connected on fieldbuses or industrial networks. The applicomR package includes software and smart board(s) specific for each type of fieldbus or industrial network. Thanks to its smart technology, all applicomR boards are able to execute the management and the treatment (polling, frame management, etc.) of the embedded protocols, resulting in remarkable application performance. Particularly, the applicomR PC2000ETH board is equipped  with 1 Ethernet port and 1 Serial port.

platforms Compatible Platforms Windows 2000 / XP Windows NT 4.0 - Intel Windows 95, 98 Windows 3.x MS-DOS OS/2 Warp v3 SCO Unix Release 5 HP-UX v10.10

protocols Compatible Ethernet Protocols Devices Ethway Groupe Schneider Industrial Ethernet ISO SIEMENS Simatic S5, S7, and TI (Sinec H1-HTB, H1-TF, H1-TI505, S7 protocol)

Serial Protocols Devices 3964/3964R (free messaging or RK512) SIEMENS Simatic S5 AS511 SIEMENS Simatic S5 (programming port) Batibus Merlin Gerin (building automation) Data Link Elsag Bailey DF1, DH, DH+, DH-485 * Rockwell Automation (programming port) Modbus (master & slave) All Modbus & Jbus devices PPI+, PPI SIEMENS Simatic S7-200 (programming port) Saïa Bus Sa?/FONT>a SNP-X GE-Fanuc/Cegelec SucomA Kl?/FONT>ckner-Moeller Sysmac Way Omron TI-Dir SIEMENS Simatic TI-505 (programming port) Uni-Telway (master & slave) Groupe Schneider Kit4000TD Development toolkit for serial protocols

* DF1: for DH and DH+ via 1770-KF2.  For DH-485 via 1770-KF3 (1770-KF2 and 1770-KF3 not included)

technical data PC2000ETH Technical Data   Unit ISA PC board (short length, single width) Processor Intel 80386EX - 24 MHz Memory 1 Mbyte dynamic RAM Supported Interrupts 2,3,4,5,6,7,10,11,12,14,15 DPRAM Address from C8000 to DE000 (2 Kbytes used per board) Discrete Input Opto-coupled discrete input with LED Voltage -> DC +10 to +30 or AC 24 V (50 to 60 Hz) Discrete Output "WatchDog" contact output LED; contact free from potential (floating) (24V DC, 0.25 A) Technology SMC technology; Complies with EMC for both Industrial and office use Dimensions (L x W) 191mm x 106mm (7.52" x 4.17") Consumption 3 W (max. 0.6A) Operating Temperature 0?C (32?F) up to +65?C (149?F) Storage Temperature -40?C (-92?F) up to +80?C (176?F)

PC2000ETH Ethernet Port Data Port Type 1 Ethernet port - IEEE 802.3 Connector Type 15-pin AUI female connector (for BNC, type N, RJ45 or optical transceiver) Speed 10 Mbps

PC2000ETH Serial Port Data   Port Type 1 asynchronous serial port Connector Type 9-pin Sub-D male Transmission LEDs 1 Transmit LED / 1 Receive LED Electrical Interface Plugged on board: RS232C (2 or 6 signals) interface RS232C (2 or 6 signals) interface with galvanic insulation (500 Volts) RS485/RS422 interface RS485/RS422 interface with galvanic insulation (500 Volts) 20mA current loop interface Batibus interface Baud Rate from 50 to 38400 bps Supported Format 7 or 8 data bits 1 or 2 stop bits odd, even or no parity

utilities Utilities Board configuration utility (devices, protocols, communication parameters) Cyclic function configuration utility Diagnostics and test programs

add-on Electrical Interfaces RS232C RS232C with galvanic insulation RS422/RS485 RS422/RS485 with galvanic insulation 20mA current loop Profibus module Profibus module with galvanic insulation Batibus module

ordering applicom® on PC2000ETH board Reference under Windows NT Intel, Windows 2000 / XP PC2000ETH/NT under Windows 95/98 PC2000ETH/W95 under Windows 3.x PC2000ETH/WIN under MS-DOS PC2000ETH/DOS under OS/2 PC2000ETH/OS2 under SCO Unix PC2000ETH/SCO under HP-UX PC2000ETH/UX

Electrical interfaces Reference RS232C 5RS232 RS232C with galvanic insulation (500 volts) 6RS232 RS422/RS485 5RS485 RS422/RS485 with galvanic insulation (500 Volts) 6RS485 20mA current loop 5BC20 Profibus module 5PFB485 Profibus module with galvanic insulation 6PFB485 Batibus module 5BCBAT

Ethernet Protocols Devices Reference Ethway Groupe Schneider PC/TE Industrial Ethernet ISO SIEMENS Simatic S5, S7, and TI (Sinec H1-HTB, H1-TF, H1-TI505, S7 protocol) PC/H1

Serial Protocols Devices Reference 3964/3964R SIEMENS Simatic S5 PC/39 AS511 SIEMENS Simatic S5 (programming port) PC/AS Batibus Merlin Gerin (building automation) PC/BAT Data Link Elsag Bailey PC/DA DF1, DH, DH+, DH-485* Rockwell Automation (programming port) PC/DF Modbus All Jbus or Modbus devices PC/MB PPI+, PPI SIEMENS Simatic S7-200 (programming port) PC/PPI Sa?/FONT> a Bus Sa?/FONT>a PC/SB SNP-X GE-Fanuc/Cegelec PC/SNP SucomA Kl?/FONT>ckner-Moeller PC/SU Sysmac Way Omron PC/SW TI-Dir SIEMENS Simatic TI-505 (programming port) PC/TI Uni-Telway Groupe Schneider PC/TE Kit4000TD Development toolkit for serial protocols KIT4000TD

(*) DF1: for DH and DH+ via 1770-KF2.  For DH-485 via 1770-KF3 (1770-KF2 and 1770-KF3 not included)